Salta al contenuto principale
Aiuto

Disassembling Sony Cyber-shot DSC-W230 Removing the Camera Sensor

Pallini!

Pallini!

Un migliore coordinamento tra i markup e il colore/tipo dei pallini aiuterà a rendere più chiara questa guida!

Prerequisite Mancanti

Prerequisite Mancanti

A questa guida mancano informazioni su come avviare la procedura. Fai una guida prerequisita!

Tagliatore di Passi

Tagliatore di Passi

Questa guida contiene passaggi inutili. Tagliali, sii più conciso!

Attrezzi Non Corretti

Attrezzi Non Corretti

Contribuisci a rendere migliore questa guida usando i giusti strumenti nelle immagini e/o nel testo.

Necessarie Immagini Migliori

Necessarie Immagini Migliori

Delle foto più belle renderanno migliore questa guida. Contribuisci scattando, modificando o caricando immagini nuove!

Removal of the camera sensor from the camera/battery housing.

  • Autore: Steve Van Hall
  • Stima il tempo: 5 minuti
  • Difficoltà: Moderato

If the camera sensor is faulty it must be removed and replaced. This guide will detail the removal of the camera sensor from the camera/battery housing.

Passo 1 Disassembling Sony Cyber-shot DSC-W230 Removing the Camera Sensor  ¶ 

After removal of the LCD screen and ribbon cable the camera sensor can be accessed. Position the camera with the circuit board facing up, showing the two ribbon cables connecting the camera sensor.

Passo 1 Disassembling Sony Cyber-shot DSC-W230 Removing the Camera Sensor  ¶ 

  • After removal of the LCD screen and ribbon cable the camera sensor can be accessed.

  • Position the camera with the circuit board facing up, showing the two ribbon cables connecting the camera sensor.

  • Gently pry the black tabs on both cables until they are flipped up.

  • Gently pull the ribbon cables until they slide out of the connectors.

Passo 2  ¶ 

Flip the camera over so the shutter is facing up and the top buttons are away from you. Making sure the ribbon cables are free, lift the battery housing up while keeping the camera sensor on the table, this will flip it up and provide access to the shutter button cable. Gently slide out the cable to free the camera sensor from the rest of the housing.

Passo 2  ¶ 

  • Flip the camera over so the shutter is facing up and the top buttons are away from you.

  • Making sure the ribbon cables are free, lift the battery housing up while keeping the camera sensor on the table, this will flip it up and provide access to the shutter button cable.

  • Gently slide out the cable to free the camera sensor from the rest of the housing.