Salta al contenuto principale
Aiuto

MacBook Pro 15" Unibody Late 2008 and Early 2009 Battery Connector Replacement

Replace the battery interconnect cable in your MacBook Pro 15" Unibody Late 2008 and Early 2009.

Charges battery and connects battery to logic board.

Sezioni

Passo 1 Battery Connector  ¶ 

Remove three 2 mm Phillips screws securing the battery connector cover to the upper case.

Passo 1 Battery Connector  ¶ 

  • Remove three 2 mm Phillips screws securing the battery connector cover to the upper case.

Passo 2  ¶ 

The battery connector cover is held onto the upper case by a strong adhesive. Use a spudger to loosen the adhesive around the edges of the battery connector. Lift the battery connector cover out of the upper case.

Passo 2  ¶ 

  • The battery connector cover is held onto the upper case by a strong adhesive. Use a spudger to loosen the adhesive around the edges of the battery connector.

  • Lift the battery connector cover out of the upper case.

Passo 3  ¶ 

Peel the battery connector cable off the adhesive securing it to the upper case. De-route the battery connector cable through the gap in the upper case and remove it from the computer.

Passo 3  ¶ 

  • Peel the battery connector cable off the adhesive securing it to the upper case.

  • De-route the battery connector cable through the gap in the upper case and remove it from the computer.