Salta al contenuto principale
Aiuto

PlayStation Vita Wireless Card Replacement

Install a Wireless Card on the PlayStation Vita

This guide takes you through the process of installing the Wireless Card on the PlayStation Vita.

Passo 1 Wireless Card  ¶ 

Using the pointy end of the spudger, disconnect the three antenna cable connectors on top of the wireless card. Deroute the antenna cables so that they are out of the wireless card casing. Rest the wires out of the way. Deroute the antenna cables so that they are out of the wireless card casing. Rest the wires out of the way.

Passo 1 Wireless Card  ¶ 

  • Using the pointy end of the spudger, disconnect the three antenna cable connectors on top of the wireless card.

  • Deroute the antenna cables so that they are out of the wireless card casing. Rest the wires out of the way.

Passo 2  ¶ 

Hook the spudger beneath the tab on the wireless card casing and release the tab. Peel up and remove the wireless card casing.

Passo 2  ¶ 

  • Hook the spudger beneath the tab on the wireless card casing and release the tab.

  • Peel up and remove the wireless card casing.

Passo 3  ¶ 

Remove the two 4.4mm Phillips #00 screws on the wireless card. The wireless card will naturally pop out at an angle.

Passo 3  ¶ 

  • Remove the two 4.4mm Phillips #00 screws on the wireless card.

  • The wireless card will naturally pop out at an angle.

  • Pull out the wireless card.