Salta al contenuto principale
Aiuto

Polaroid LCD-0700P Input/Output Board Replacement

Passo Mancante

Passo Mancante

Oops! A questa guida al momento mancano alcuni passi importanti.

This guide covers the removal of the input/output board from the Polaroid LCD-0700P.

  • Autore: Mario T
  • Stima il tempo: 10 minuti
  • Difficoltà: Facile

Passo 1 Input/Output Board  ¶ 

Use two blue plastic opening tools to remove the three wire connectors on the side of the input/output board. Use a Philips #0 screwdriver to remove the five screws on the board. One of the screws is hidden below the black tape, so gently pull the tape to the side to gain access to it. Be sure to replace the tape when reinstalling the board.

Passo 1 Input/Output Board  ¶ 

  • Use two blue plastic opening tools to remove the three wire connectors on the side of the input/output board.

  • Use a Philips #0 screwdriver to remove the five screws on the board.

  • One of the screws is hidden below the black tape, so gently pull the tape to the side to gain access to it. Be sure to replace the tape when reinstalling the board.

  • Lift board from case.