Salta al contenuto principale
Aiuto

Lumen Projector Bulb Replacement

Inconveniente Markup

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

Tagliatore di Passi

Tagliatore di Passi

Questa guida contiene passaggi inutili. Tagliali, sii più conciso!

This guide will provide a step-by-step procedure to replace a projector light bulb and clean the surrounding area.

This guide will provide a step-by-step process on how to safely remove and replace a light bulb for a Ben-Q projector. In the process of this removal, it will be demonstrated how to clean the area of any dust and how to recycle the waste material- old light bulb.

Passo 1 Unplug projector  ¶ 

Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.

Passo 1 Unplug projector  ¶ 

  • Unplug the projector from the wall outlet to allow for the light bulb to cool for at least 30 minutes.

Passo 2  ¶ 

On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.

Passo 2  ¶ 

  • On the bottom side of the projector, locate and unscrew the back cover using a Philip's head screwdriver.

Passo 3  ¶ 

Unscrew the bulb screws on either side of the silver plate.

Passo 3  ¶ 

  • Unscrew the bulb screws on either side of the silver plate.

Passo 4  ¶ 

Remove the light bulb from the projector by lifting the silver handle and pulling up.

Passo 4  ¶ 

  • Remove the light bulb from the projector by lifting the silver handle and pulling up.

Passo 5  ¶ 

Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.

Passo 5  ¶ 

  • Clean the now vacant area where the light bulb once belonged of dust and particles using a Q-tip.

Passo 6  ¶ 

Use a new Q-tip to clean the fan blades and hole in which the light enters.

Passo 6  ¶ 

  • Use a new Q-tip to clean the fan blades and hole in which the light enters.

Passo 7  ¶ 

Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.

Passo 7  ¶ 

  • Open and remove the new light bulb from its box with clean hands to prevent from getting the bulb dirty.

Passo 8  ¶ 

Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.

Passo 8  ¶ 

  • Place the new bulb inside making sure to align the bulb towards the light hole and the wire connector towards the wire receiver.

Passo 9  ¶ 

Dispose of the bulb by sending it to a recycling center.

Passo 9  ¶ 

  • Dispose of the bulb by sending it to a recycling center.