Salta al contenuto principale
Aiuto

Xbox One Wireless Controller Teardown

Smontaggio

Smontaggio

Gli smontaggi danno un'immagine dell'interno di device e non dovrebbero essere usati come istruzioni di smontaggio.

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Passo 1 Get an Xbox One Controller  ¶ 

Start off with having an Xbox One Controller (:

Passo 1 Get an Xbox One Controller  ¶ 

  • Start off with having an Xbox One Controller (:

Passo 2 Remove First Screw  ¶ 

Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker. Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker.

Passo 2 Remove First Screw  ¶ 

  • Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker.

Passo 3 Remove side panels  ¶ 

Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun. Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun. Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun.

Passo 3 Remove side panels  ¶ 

  • Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun.

Passo 4 Remove all screws  ¶ 

By removing all side panels all 5 T8 security screws have appeared!

Passo 4 Remove all screws  ¶ 

  • By removing all side panels all 5 T8 security screws have appeared!

Passo 5 Remove Faceplate  ¶ 

Once you removed the T8 security screws remove the front face plate. Once you removed the T8 security screws remove the front face plate. Once you removed the T8 security screws remove the front face plate.

Passo 5 Remove Faceplate  ¶ 

  • Once you removed the T8 security screws remove the front face plate.

Passo 6 Remove T6 screws  ¶ 

Remove the T6 screws  to remove the PCB's. It takes a pull to seperate the connectors. Watch the wires! You can not fully remove the circuit board without removing the wires and it requires soldering.

Passo 6 Remove T6 screws  ¶ 

  • Remove the T6 screws to remove the PCB's.

  • It takes a pull to seperate the connectors.

  • Watch the wires! You can not fully remove the circuit board without removing the wires and it requires soldering.

Passo 7  ¶ 

Remove the top cover, it folds over. There are 5 T6 and one 1,5mm allen to remove. There are 5 T6 and one 1,5mm allen to remove.

Passo 7  ¶ 

  • Remove the top cover, it folds over.

  • There are 5 T6 and one 1,5mm allen to remove.

Passo 8  ¶ 

Remove the circuit board Under the rubber is the A B X Y buttons. Under the rubber is the A B X Y buttons.

Passo 8  ¶ 

  • Remove the circuit board

  • Under the rubber is the A B X Y buttons.

Passo 9  ¶ 

Follow the instructions in reverse to get everything together again. :D Follow the instructions in reverse to get everything together again. :D Follow the instructions in reverse to get everything together again. :D

Passo 9  ¶ 

  • Follow the instructions in reverse to get everything together again. :D