Salta al contenuto principale
Aiuto

Disassembling Apple AirPort Extreme Model A1034 Outer Case

Foto Azione

Foto Azione

Passa all'azione, eroe! Questa guida ha bisogno di immagini che meglio illustrano come eseguire azioni specifiche.

In this guide you will be shown how to remove the outer case on the Apple Airport Extreme Model A1034.

This is a step-by-step guide to remove the outer case on the AirPort Extreme Model A1034.

Passo 1 Outer Case  ¶ 

Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

Passo 1 Outer Case  ¶ 

  • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

Passo 2  ¶ 

Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

Passo 2  ¶ 

  • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

Passo 3  ¶ 

Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

Passo 3  ¶ 

  • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

Passo 4  ¶ 

Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Passo 4  ¶ 

  • Unplug the black connector on the top of the metal casing by gently pulling horizontally.