Salta al contenuto principale
Aiuto

HP Photosmart c3180 Driver Motor Replacement

Inconveniente Markup

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

Replacing a dead or defective driver motor.

  • Autore: Jim
  • Stima il tempo: 15 - 20 minuti
  • Difficoltà: Difficile

Passo 1 Driver Motor  ¶ 

Set aside the printer body. Remove the two T10 4 mm Torx screws.

Passo 1 Driver Motor  ¶ 

  • Set aside the printer body.

  • Remove the two T10 4 mm Torx screws.

Passo 2  ¶ 

Grasp the bottom of the drive motor and rock it away from the center to release the tension in the cable. Use your fingers to unhook the cable from drive motor.

Passo 2  ¶ 

  • Grasp the bottom of the drive motor and rock it away from the center to release the tension in the cable.

  • Use your fingers to unhook the cable from drive motor.

Passo 3  ¶ 

Remove the drive motor.

Passo 3  ¶ 

  • Remove the drive motor.