Salta al contenuto principale
Aiuto

Disassembling Apple AirPort Extreme Base Station Model A1034

Foto Azione

Foto Azione

Passa all'azione, eroe! Questa guida ha bisogno di immagini che meglio illustrano come eseguire azioni specifiche.

Necessarie Immagini Migliori

Necessarie Immagini Migliori

Delle foto più belle renderanno migliore questa guida. Contribuisci scattando, modificando o caricando immagini nuove!

This is a step-by-step guide to disassembly the Apple AirPort Extreme Base Station Model A1034.

  • Autore: Michael Garcia
  • Stima il tempo: 10 - 20 minuti
  • Difficoltà: Moderato

This is the beginning process to remove or replace any functional component in the AirPort.

Passo 1 Disassembling Apple AirPort Extreme Base Station Model A1034  ¶ 

Remove the three 5mm T7 Torx screws from the back panel.

Passo 1 Disassembling Apple AirPort Extreme Base Station Model A1034  ¶ 

  • Remove the three 5mm T7 Torx screws from the back panel.

Passo 2  ¶ 

Remove one 5mm phillips screw located under the identification sticker.  You will need to remove the sticker or make a hole to get to the screw.

Passo 2  ¶ 

  • Remove one 5mm phillips screw located under the identification sticker. You will need to remove the sticker or make a hole to get to the screw.

Passo 3  ¶ 

Separate the bottom and top casings.

Passo 3  ¶ 

  • Separate the bottom and top casings.

Passo 4  ¶ 

Remove the metal case from the top case of the AirPort, there are no screws holding it on. Remove the four screws from the metal casing.

Passo 4  ¶ 

  • Remove the metal case from the top case of the AirPort, there are no screws holding it on.

  • Remove the four screws from the metal casing.