Salta al contenuto principale
Aiuto

MacBook Pro 13" Unibody Mid 2009 Clutch Cover Replacement

Replace the clutch cover on your MacBook Pro 13" Unibody Mid 2009.

Use this guide to replace a damaged plastic clutch cover.

Sezioni

Passo 1 Clutch Cover  ¶ 

Grab the clutch cover as shown and slide it toward the right side of the display. It should move about 1/4" and stop. Don't force it beyond this point.

Passo 1 Clutch Cover  ¶ 

  • Grab the clutch cover as shown and slide it toward the right side of the display.

  • It should move about 1/4" and stop. Don't force it beyond this point.

Passo 2  ¶ 

Gently rock the clutch cover back and forth on its long axis while pulling it away from the display. Do this action along the length of the clutch cover until you can lift it off the framework attaching it to the display.

Passo 2  ¶ 

  • Gently rock the clutch cover back and forth on its long axis while pulling it away from the display.

  • Do this action along the length of the clutch cover until you can lift it off the framework attaching it to the display.

Passo 3  ¶ 

Remove the clutch cover from the display.

Passo 3  ¶ 

  • Remove the clutch cover from the display.