Salta al contenuto principale
Aiuto

PowerBook G4 Aluminum 12" 1-1.5 GHz Display Replacement

  • Autore: iRobot
  • Difficoltà: Difficile

Change out the entire display assembly, including the inverter, Airport antenna, hinges and metal casing.

Passo 1 Display  ¶ 

Deroute the Airport Extreme antenna from the card slot and lower case, removing tape as necessary.

Passo 1 Display  ¶ 

  • Deroute the Airport Extreme antenna from the card slot and lower case, removing tape as necessary.

Passo 2  ¶ 

Place a cloth between the screen and the bottom case.

Passo 2  ¶ 

  • Place a cloth between the screen and the bottom case.

  • Close the bottom case and turn the laptop over.

  • Remove the two Phillips screws from the bottom case.

Passo 3  ¶ 

Remove the two Phillips screws from either side of the display hinge.

Passo 3  ¶ 

  • Remove the two Phillips screws from either side of the display hinge.

Passo 4  ¶ 

Grasp the lower case and push down on the hinge side while rotating the other end of the case toward you until it pops free, then remove it entirely (leaving the display).

Passo 4  ¶ 

  • Grasp the lower case and push down on the hinge side while rotating the other end of the case toward you until it pops free, then remove it entirely (leaving the display).

  • You have effectively removed the computer from the display.