Salta al contenuto principale
Aiuto

Canon Powershot SD550 LCD Screen Replacement

Guida In Evidenza

Guida In Evidenza

Questa guida è stata giudicata eccezionalmente ben fatta dallo staff iFixit.

This guide will help you take apart the Canon PowerShot SD550 and replace the LCD screen.

  • Autore: Vivian Su
  • Stima il tempo: 20 - 30 minuti
  • Difficoltà: Facile

A cracked LCD screen is a prevalent problem in digital cameras. But, before you spend money on a new LCD screen, make sure the camera still works by taking a few pictures and uploading them to your computer. A cracked LCD will not affect the quality of the pictures. You do not want to try to replace the LCD if something else is broken.

Passo 1 LCD Screen  ¶ 

Next, peel the navigation buttons from the button panel and set them aside. To free the LCD display, remove the .113 inch screw in the top left corner. Then, rotate the screen clockwise until it lifts away from the camera.

Passo 1 LCD Screen  ¶ 

  • Next, peel the navigation buttons from the button panel and set them aside.

  • To free the LCD display, remove the .113 inch screw in the top left corner.

  • Then, rotate the screen clockwise until it lifts away from the camera.

  • There are two ribbon cables attached to the rear of the screen. Do not try to pull the screen off at this point.

Passo 2  ¶ 

To unplug the ribbon cables, pull them straight out of their plugs. Do this gently to avoid damaging the connections. After disconnecting both cables, pull the screen away from the camera to remove it.

Passo 2  ¶ 

  • To unplug the ribbon cables, pull them straight out of their plugs. Do this gently to avoid damaging the connections.

  • After disconnecting both cables, pull the screen away from the camera to remove it.