Salta al contenuto principale
Aiuto

Accessing LCD Screen

Foto Azione

Foto Azione

Passa all'azione, eroe! Questa guida ha bisogno di immagini che meglio illustrano come eseguire azioni specifiche.

Necessarie Immagini Migliori

Necessarie Immagini Migliori

Delle foto più belle renderanno migliore questa guida. Contribuisci scattando, modificando o caricando immagini nuove!

Remove LCD screen from camera's frame

  • Autore: Bassem Tossoun
  • Stima il tempo: 20 minuti
  • Difficoltà: Moderato

In this guide, you will be able to access and remove the LCD screen from the camera's frame.

Passo 1 LCD  ¶ 

On the front of the camera, in battery case, remove screws indicated: Two black 2.05mm Phillips #00 screws

Passo 1 LCD  ¶ 

  • On the front of the camera, in battery case, remove screws indicated:

  • Two black 2.05mm Phillips #00 screws

Passo 2  ¶ 

Flip the camera over to the backside and remove screws indicated: The screw circled in red is a longer black 3.00mm Phillips #00 screw

Passo 2  ¶ 

  • Flip the camera over to the backside and remove screws indicated:

  • The screw circled in red is a longer black 3.00mm Phillips #00 screw

  • The screw circled in red is a shorter black 2.00mm Phillips #00 screw

Passo 3  ¶ 

Pull the cover plate off for the two power cord jacks.

Passo 3  ¶ 

  • Pull the cover plate off for the two power cord jacks.

Passo 4  ¶ 

Cautiously and gently pull up the control board at the upper left corner, next to the viewfinder. Cautiously and gently pull up the control board at the upper left corner, next to the viewfinder. Cautiously and gently pull up the control board at the upper left corner, next to the viewfinder.

Passo 4  ¶ 

  • Cautiously and gently pull up the control board at the upper left corner, next to the viewfinder.

Passo 5  ¶ 

Remove the orange tape on top of the SD cardholder.

Passo 5  ¶ 

  • Remove the orange tape on top of the SD cardholder.

Passo 6  ¶ 

Open the battery cover and lift plastic piece off. Open the battery cover and lift plastic piece off. Open the battery cover and lift plastic piece off.

Passo 6  ¶ 

  • Open the battery cover and lift plastic piece off.

Passo 7  ¶ 

Remove tape on left side of camera.

Passo 7  ¶ 

  • Remove tape on left side of camera.

Passo 8  ¶ 

Remove the indicated 2.40mm Phillips #00 screw to release top left LCD bracket.

Passo 8  ¶ 

  • Remove the indicated 2.40mm Phillips #00 screw to release top left LCD bracket.

Passo 9  ¶ 

Remove top left LCD bracket.

Passo 9  ¶ 

  • Remove top left LCD bracket.

  • This is a small piece, be careful not to lose it.

Passo 10  ¶ 

Push down bottom left LCD bracket to release the LCD from grip. Push down bottom left LCD bracket to release the LCD from grip.

Passo 10  ¶ 

  • Push down bottom left LCD bracket to release the LCD from grip.

Passo 11  ¶ 

Gently lift up LCD screen.

Passo 11  ¶ 

  • Gently lift up LCD screen.

Passo 12  ¶ 

Slowly pull LCD screen to the left to remove it from the other grips. BEWARE: The LCD screen is attached to the logic board by two wires at the bottom. BEWARE: The LCD screen is attached to the logic board by two wires at the bottom.

Passo 12  ¶ 

  • Slowly pull LCD screen to the left to remove it from the other grips.

  • BEWARE: The LCD screen is attached to the logic board by two wires at the bottom.