Salta al contenuto principale
Aiuto

PowerBook G3 Lombard Hard Drive Replacement

Replace the hard drive in your PowerBook G3 Lombard.

  • Autore: iRobot
  • Difficoltà: Facile

You can install hard drives up to 12.5mm thick.

Passo 1 Hard Drive  ¶ 

Remove the four black Torx screws located at the four corners of the hard drive bracket.

Passo 1 Hard Drive  ¶ 

  • Remove the four black Torx screws located at the four corners of the hard drive bracket.

Passo 2  ¶ 

Pull the connector cable out from the hard drive, applying even pressure while gently rocking up and down.

Passo 2  ¶ 

  • Pull the connector cable out from the hard drive, applying even pressure while gently rocking up and down.

  • Be very careful to apply even pressure when removing the cable. If you torque too hard to either side, you may damage or destroy the hard drive's connector pins, rendering your data inaccessible.