Salta al contenuto principale
Aiuto

Sony Ericsson W200i LCD Screen Replacement

This guide goes in depth on how to swap out a faulty LCD screen for new one for the Sony Ericsson W200i cell phone.

  • Autore: Austin Cade
  • Stima il tempo: 20 - 25 minuti
  • Difficoltà: Difficile

Replacing a faulty LCD is relatively simple, just be patient and gentle while replacing the screen.

Passo 1 LCD Screen  ¶ 

Undo the metal clip on each side of the core using the plastic opening tool. Do not bend clips past 2mm or they could break. Do not bend clips past 2mm or they could break.

Passo 1 LCD Screen  ¶ 

  • Undo the metal clip on each side of the core using the plastic opening tool.

  • Do not bend clips past 2mm or they could break.

Passo 2  ¶ 

Gently pull the white keyboard and charging port away from the motherboard and off the phone. Gently pull the white keyboard and charging port away from the motherboard and off the phone. Gently pull the white keyboard and charging port away from the motherboard and off the phone.

Passo 2  ¶ 

  • Gently pull the white keyboard and charging port away from the motherboard and off the phone.

Passo 3  ¶ 

Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder. The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard. Using too much force may bend the copper ribbon.

Passo 3  ¶ 

  • Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder.

  • The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.

  • Using too much force may bend the copper ribbon.