Salta al contenuto principale
Aiuto

PowerBook G4 Aluminum 15" 1.67 GHz Display Inverter Replacement

Replace a blown-out display inverter to restore the backlight of your PowerBook G4 Aluminum 15" 1.67 GHz's LCD.

Use this guide to replace a blown-out display inverter.

Strumenti (continua)
Componenti Rilevanti

Passo 1 Display Inverter  ¶ 

If necessary, use the flat end of a spudger to peel the tape securing both ends of the display inverter to the clutch cover. If necessary, use the flat end of a spudger to peel the tape securing both ends of the display inverter to the clutch cover.

Passo 1 Display Inverter  ¶ 

  • If necessary, use the flat end of a spudger to peel the tape securing both ends of the display inverter to the clutch cover.

Passo 2  ¶ 

The inverter is an extremely thin circuit board that is very delicate and easily cracked. Take care when handling. Using the tip of a spudger, raise the inverter out from the clutch cover.

Passo 2  ¶ 

  • The inverter is an extremely thin circuit board that is very delicate and easily cracked. Take care when handling.

  • Using the tip of a spudger, raise the inverter out from the clutch cover.

  • Lift the inverter enough to reveal both cable connectors.

Passo 3  ¶ 

Disconnect both inverter cables by pulling their connectors away from the sockets on the inverter board. Remove the inverter from the display.

Passo 3  ¶ 

  • Disconnect both inverter cables by pulling their connectors away from the sockets on the inverter board.

  • Remove the inverter from the display.