Salta al contenuto principale
Aiuto

Sony Cyber-shot DSC-W290 Flash Bulb Replacement

Vigilanza sulla Grammatica

Vigilanza sulla Grammatica

Adotta il tuo insegnante di inglese interno e contribuisci a migliorare la grammatica di questa guida!

Foto Azione

Foto Azione

Passa all'azione, eroe! Questa guida ha bisogno di immagini che meglio illustrano come eseguire azioni specifiche.

This guide will show you how to install or replace the Sony Cyber-shot DSC-W290's flash bulb.

  • Autore: William Schill
  • Stima il tempo: 30 minuti
  • Difficoltà: Difficile

Make sure you have all of the requisite tools on hand before beginning to replace the flash bulb.

Passo 1 Flash Bulb  ¶ 

Pull the top of the camera off and turn it so the bottom is facing you. Desolder the three connections from the bulb to the small circuit board. Remove the excess solder using your soldering iron and desoldering wick.

Passo 1 Flash Bulb  ¶ 

  • Pull the top of the camera off and turn it so the bottom is facing you.

  • Desolder the three connections from the bulb to the small circuit board.

  • Remove the excess solder using your soldering iron and desoldering wick.

Passo 2  ¶ 

Gently wiggle the flash bulb to remove it from the joints. It may be necessary to use the soldering iron to heat up the joints as you pull it off.

Passo 2  ¶ 

  • Gently wiggle the flash bulb to remove it from the joints.

  • It may be necessary to use the soldering iron to heat up the joints as you pull it off.