Salta al contenuto principale
Aiuto

HP Pavilion dv6000 Optical Drive Assembly Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Replace the optical drive assembly in your HP Pavilion dv6000.

Replace the optical drive assembly in your HP Pavilion dv6000.

Passo 1 Optical Drive Assembly  ¶ 

Remove the three 3.2 mm screws securing the top plate of the optical drive. Lift and remove the top plate up off the optical drive.

Passo 1 Optical Drive Assembly  ¶ 

  • Remove the three 3.2 mm screws securing the top plate of the optical drive.

  • Lift and remove the top plate up off the optical drive.

Passo 2  ¶ 

Lift and remove the optical drive assembly.

Passo 2  ¶ 

  • Lift and remove the optical drive assembly.

  • It may be helpful to gently "rock" the drive assembly side to side to dislodge it from its recess.

  • For the rest of the guide, be careful to not touch any of the circuitry on the board as well as the laser lens!

Passo 3  ¶ 

Flip the drive over.

Passo 3  ¶ 

  • Flip the drive over.

  • Pull the small ribbon cable straight away from its socket on the optical drive assembly board.

Passo 4  ¶ 

Use your fingernail to flip up the cable retaining flap on the ZIF socket for the larger ribbon cable.

Passo 4  ¶ 

  • Use your fingernail to flip up the cable retaining flap on the ZIF socket for the larger ribbon cable.

  • Pull the larger ribbon cable straight out of its socket on the optical drive assembly board.

Passo 5  ¶ 

Lift and remove the optical drive assembly from the optical drive framework.

Passo 5  ¶ 

  • Lift and remove the optical drive assembly from the optical drive framework.

  • Optical drive assembly remains.