Salta al contenuto principale
Aiuto

Nintendo DSi Stylus Housing Replacement

Replace the plastic stylus housing on your Nintendo DSi.

Use this guide to remove the plastic stylus housing from your DSi.

Passo 1 Stylus Housing  ¶ 

Pull the stylus straight out its housing and remove it from the rear case.

Passo 1 Stylus Housing  ¶ 

  • Pull the stylus straight out its housing and remove it from the rear case.

Passo 2  ¶ 

Remove the five 3.9 mm Phillips screws securing the stylus holder to the rear case.

Passo 2  ¶ 

  • Remove the five 3.9 mm Phillips screws securing the stylus holder to the rear case.

Passo 3  ¶ 

Lift and remove the left plastic protector from the DSi's rear case. Grasp the stylus holder from the left side and lift upwards to remove it from the DSi.

Passo 3  ¶ 

  • Lift and remove the left plastic protector from the DSi's rear case.

  • Grasp the stylus holder from the left side and lift upwards to remove it from the DSi.