Salta al contenuto principale
Aiuto

Nokia E62 Complete Disassembly

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

How to completely take apart a Nokia E62.

Passo 1 Nokia E62 Complete Disassembly  ¶ 

To start, press one of the latches at the top of the phone to open the rear cover.

Passo 1 Nokia E62 Complete Disassembly  ¶ 

  • To start, press one of the latches at the top of the phone to open the rear cover.

Passo 2  ¶ 

Carefully press the other latch.

Passo 2  ¶ 

  • Carefully press the other latch.

Passo 3  ¶ 

Open rear cover by this side.

Passo 3  ¶ 

  • Open rear cover by this side.

Passo 4  ¶ 

Press the three latches to open this side of the cover.

Passo 4  ¶ 

  • Press the three latches to open this side of the cover.

Passo 5  ¶ 

Remove the rear cover.

Passo 5  ¶ 

  • Remove the rear cover.

Passo 6  ¶ 

Removed rear cover. See  the latches .

Passo 6  ¶ 

  • Removed rear cover. See the latches .

Passo 7  ¶ 

Remove the screws using Torx T6 screw driver.

Passo 7  ¶ 

  • Remove the screws using Torx T6 screw driver.

Passo 8  ¶ 

Remove six T6 screws.

Passo 8  ¶ 

  • Remove six T6 screws.

Passo 9  ¶ 

Remove the assembly. The front cover will be released.

Passo 9  ¶ 

  • Remove the assembly. The front cover will be released.

Passo 10  ¶ 

The front cover released.

Passo 10  ¶ 

  • The front cover released.

Passo 11  ¶ 

To remove the display , unscrew the T6 Torx  at top.

Passo 11  ¶ 

  • To remove the display , unscrew the T6 Torx at top.

Passo 12  ¶ 

CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !

Passo 12  ¶ 

  • CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !

Passo 13  ¶ 

Carefully disconnect the Flex cable connector. Then remove the display.

Passo 13  ¶ 

  • Carefully disconnect the Flex cable connector. Then remove the display.

Passo 14  ¶ 

Carefully remove the adhesive keyboard membrane.

Passo 14  ¶ 

  • Carefully remove the adhesive keyboard membrane.

  • You can replace it at this step if you need to.

Passo 15  ¶ 

You can clean the keyboard surface with alcohol, if you dropped a drink here.

Passo 15  ¶ 

  • You can clean the keyboard surface with alcohol, if you dropped a drink here.

Passo 16  ¶ 

When you replace the keyboard membrane,  align the two contacts at bottom.

Passo 16  ¶ 

  • When you replace the keyboard membrane, align the two contacts at bottom.

Passo 17  ¶ 

You can wash the front cover and keyboard if they are dirty.

Passo 17  ¶ 

  • You can wash the front cover and keyboard if they are dirty.

Passo 18  ¶ 

Keyboard - clean it if necessary.

Passo 18  ¶ 

  • Keyboard - clean it if necessary.

Passo 19  ¶ 

Rear side of the circuit board.

Passo 19  ¶ 

  • Rear side of the circuit board.

Passo 20  ¶ 

Speaker and antenna contacts.

Passo 20  ¶ 

  • Speaker and antenna contacts.

Passo 21  ¶ 

If necessary, you can replace the joystick, the button module or the connector housing.

Passo 21  ¶ 

  • If necessary, you can replace the joystick, the button module or the connector housing.