Salta al contenuto principale
Aiuto

Xbox 360 S RF Module Replacement

RF module replacement.

Replace a faulty RF module to fix a non-responsive power button on your Xbox 360 S.

Sezioni

Passo 1 RF Module  ¶ 

Remove the two 5.6 mm T8 Torx screws securing the RF module to the metal case.

Passo 1 RF Module  ¶ 

  • Remove the two 5.6 mm T8 Torx screws securing the RF module to the metal case.

Passo 2  ¶ 

The RF module is still connected to the Xbox by a large USB-type connector. Pull the board directly away from the Xbox to remove it.

Passo 2  ¶ 

  • The RF module is still connected to the Xbox by a large USB-type connector.

  • Pull the board directly away from the Xbox to remove it.