Salta al contenuto principale
Aiuto

MacBook Pro 15" Unibody Mid 2010 Lower Case Replacement

Replace the lower case on your Mid 2010 MacBook Pro 15" Unibody.

  • Autore: Walter Galan
  • Stima il tempo: 3 minuti
  • Difficoltà: Moderato

Remove the lower case to access most of your MacBook Pro's internals.

Passo 1 Lower Case  ¶ 

Remove the following ten screws securing the lower case to the upper case:

Passo 1 Lower Case  ¶ 

  • Remove the following ten screws securing the lower case to the upper case:

  • Three 13.5 mm (14.1 mm) Phillips screws.

  • Seven 3 mm Phillips screws.

  • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

Passo 2  ¶ 

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

Passo 2  ¶ 

  • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

  • Remove the lower case and set it aside.