Salta al contenuto principale
Aiuto

Mac mini (PowerPC) AirPort Extreme Card Replacement

  • Autore: iRobot
  • Difficoltà: Moderato

Install an Airport Extreme card internally.

Passo 1 AirPort Extreme Card  ¶ 

Remove the two silver Phillips screws from the corners of the wireless interface board.

Passo 1 AirPort Extreme Card  ¶ 

  • Remove the two silver Phillips screws from the corners of the wireless interface board.

Passo 2  ¶ 

Grasp the board at the front and back, and lift up on the front until the board pulls free of its connector.

Passo 2  ¶ 

  • Grasp the board at the front and back, and lift up on the front until the board pulls free of its connector.

Passo 3  ¶ 

Remove the yellow tape securing the Airport card to the wireless interface board.

Passo 3  ¶ 

  • Remove the yellow tape securing the Airport card to the wireless interface board.

Passo 4  ¶ 

Grasp the wireless interface board with one hand and the clear plastic tab on the Airport card with the other hand, and pull the Airport card from its connector.

Passo 4  ¶ 

  • Grasp the wireless interface board with one hand and the clear plastic tab on the Airport card with the other hand, and pull the Airport card from its connector.