Salta al contenuto principale
Aiuto

HP Pavilion g7-2275dx RAM Replacement

Replacing the RAM in your HP g7-2275.

  • Autore: John Sutton
  • Stima il tempo: 1 - 2 minuti
  • Difficoltà: Facile

One of the easiest ways to speed up your computer is to add more RAM. This guide will walk you through how to replace the RAM in your laptop.

Be sure that you buy the right type of RAM. The g7-2275 dx supports two stick of RAM, up to 8 GB. It takes 204-pin SODIMM DDR3 PC3-10600 1333MHz RAM.

For more information about RAM, check out iFixit's RAM page

Passo 1 RAM  ¶ 

Use your fingers, plastic opening tools, or pliers to pull the silver brackets away from the RAM. The RAM should pop up to a 35 degree angle.

Passo 1 RAM  ¶ 

  • Use your fingers, plastic opening tools, or pliers to pull the silver brackets away from the RAM.

  • The RAM should pop up to a 35 degree angle.

Passo 2  ¶ 

Gently pull the RAM straight out in the direction it currently is orientated. When inserting new RAM, place the RAM in the black housing at a 35 degree angle (it will fit loosely), then push down until it clicks into the silver brackets.

Passo 2  ¶ 

  • Gently pull the RAM straight out in the direction it currently is orientated.

  • When inserting new RAM, place the RAM in the black housing at a 35 degree angle (it will fit loosely), then push down until it clicks into the silver brackets.

  • This computer supports two sticks of RAM. To add a second stick, repeat the above step with the upper black housing. (Ensure that you have the correct size and type of RAM before trying to add it).