Salta al contenuto principale
Aiuto

Gateway NV52 Hard Drive Compartment Replacement

Follow these steps to easily remove the Hard Drive Compartment.

  • Autore: Tim En
  • Stima il tempo: 5 minuti
  • Difficoltà: Molto facile

Access to the Hard Drive Compartment will require some tool work.

Passo 1 Hard Drive Compartment  ¶ 

Remove the 1/4" Phillip screw located at the top right of the Hard Drive using a Phillips #0 Screwdriver .

Passo 1 Hard Drive Compartment  ¶ 

  • Remove the 1/4" Phillip screw located at the top right of the Hard Drive using a Phillips #0 Screwdriver .

Passo 2  ¶ 

Remove the Hard Drive component from its compartment. To do so, slide the component downward away from the battery pack. Lift the Hard Drive to a 90 degree angle and out of its slot. Place the Hard Drive in a designated zone.

Passo 2  ¶ 

  • Remove the Hard Drive component from its compartment. To do so, slide the component downward away from the battery pack.

  • Lift the Hard Drive to a 90 degree angle and out of its slot.

  • Place the Hard Drive in a designated zone.