Salta al contenuto principale
Aiuto

Gateway SA1 Keyboard Key Replacement

Introduzione Migliore

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

A short guide on how to remove keys on the keyboard and replace them.

Notice: The keyboard does not need to be removed in order to replace the keys.

Passo 1 Keyboard Key  ¶ 

Insert plasitic opening tool into the side of key as shown.

Passo 1 Keyboard Key  ¶ 

  • Insert plasitic opening tool into the side of key as shown.

Passo 2  ¶ 

Press downward on outer end of plastic opening tool unitl key begins to pop up. (you will hear a click)

Passo 2  ¶ 

  • Press downward on outer end of plastic opening tool unitl key begins to pop up. (you will hear a click)

  • Repeat Step 1 and Step 2 on opposite side of same key.

Passo 3  ¶ 

To insert new key, place it directly centered over the rubber nipple and press down firmly.

Passo 3  ¶ 

  • To insert new key, place it directly centered over the rubber nipple and press down firmly.