Salta al contenuto principale
Aiuto

PlayStation 4 Power Supply Replacement

Replacement of Power Supply

  • Autore: Robert Harvey
  • Stima il tempo: 10 minuti
  • Difficoltà: Facile

Use this guide to replace the power supply of Sony's first generation PS4. Be aware that any replacement or teardown beyond the hard drive voids the Sony warranty.

Passo 1 Power Supply  ¶ 

Flip the PS4 over on its top.

Passo 1 Power Supply  ¶ 

  • Flip the PS4 over on its top.

Passo 2  ¶ 

Remove the four stickers on the back of the PS4. Despite the scary-sounding warning on the sticker, Sony cannot legally void your warranty for removing it—only if you damage your device.

Passo 2  ¶ 

Passo 3  ¶ 

Remove the three 9mm TR8 Torx Security screws on the back of the system.

Passo 3  ¶ 

  • Remove the three 9mm TR8 Torx Security screws on the back of the system.

Passo 4  ¶ 

Remove the bottom panel by lifting the front piece up and sliding the panel towards the back.

Passo 4  ¶ 

  • Remove the bottom panel by lifting the front piece up and sliding the panel towards the back.

Passo 5  ¶ 

Remove the three 9mm TR9 Torx screws.

Passo 5  ¶ 

  • Remove the three 9mm TR9 Torx screws.

  • Remove the two 4cm Phillips head #1 screws.

Passo 6  ¶ 

Lift straight up on the power supply.

Passo 6  ¶ 

  • Lift straight up on the power supply.

Passo 7  ¶ 

Remove the 5 wire plug that is attached from the power supply to the motherboard. You can now fully remove the power supply from the system.

Passo 7  ¶ 

  • Remove the 5 wire plug that is attached from the power supply to the motherboard.

  • You can now fully remove the power supply from the system.