Tecnica: Repairing Monoprice Super Slim Optical USB Mouse with DPI Adjustment Scroll Wheel
The scroll wheel axle is the weakest part of this mouse and the component most likely to fail.
- Autore: Jeff Snyder
- Stima il tempo: 10 minuti
- Difficoltà: Facile
Use this guide to repair a broken scroll wheel. Be advised, the longevity of your repaired mouse will depend on the strength of the glue or epoxy used in the repair.
Incorpora questa guida
Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito / forum.
Passo 1 — Repairing Monoprice Super Slim Optical USB Mouse with DPI Adjustment Scroll Wheel ¶
Slide the tab on the bottom of the mouse to release the top panel.
Passo 2 ¶
Remove the top panel from the mouse.
Passo 3 ¶
Remove four 7mm Phillips #1 screws.
Passo 4 ¶
Use a spudger to pry the upper shell from the mouse at the cord entrance.
Passo 5 ¶
Lift the scroll wheel out of the mouse.
Passo 6 ¶
Wiggle the USB cord free of the mouse.
Resist the temptation to yank the cord free. The wires are very delicate and soldered connections are weak
Passo 7 ¶
Remove one 3mm Phillips #1 screw.
Passo 8 ¶
Push the broken axle piece out of the socket.
Passo 9 ¶
Glue broken axle piece back onto the scroll wheel.