Salta al contenuto principale
Aiuto

Disassembling Macintosh IIsi Power Supply

  • Autore: Chris Green
  • Stima il tempo: 15 - 30 minuti
  • Difficoltà: Moderato

The Macintosh IIsi Uses a 120/240V AC Power Supply. It provides power directly to the logic board. From there, it is distributed to the rest of the computer.

Passo 1 Power Supply  ¶ 

To remove the power supply, squeeze these two tabs and lift the front up. On the back of the power supply, there is a tab that also must be pressed to remove the power supply fully.  You can then lift it out all the way.  A firm tug may be necessary to seperate the power connector.

Passo 1 Power Supply  ¶ 

  • To remove the power supply, squeeze these two tabs and lift the front up.

  • On the back of the power supply, there is a tab that also must be pressed to remove the power supply fully. You can then lift it out all the way. A firm tug may be necessary to seperate the power connector.

Passo 2  ¶ 

Information on the power supply: It was made by Sony in 1990, and uses a 10-Pin power connector.

Passo 2  ¶ 

  • Information on the power supply:

  • It was made by Sony in 1990, and uses a 10-Pin power connector.