Mr. Coffee DW13 Heating Plate Replacement
This guide will explain how to replace the coffee maker's heating plate.
- Autore: Luke Kraemer
- Stima il tempo: 25 minuti
- Difficoltà: Moderato
Before replacing the heating plate, make sure that your machine is unplugged and dry, and that your work space is clean.
Incorpora questa guida
Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito / forum.
Passo 1 — Heating Plate ¶
Using the Phillips Head #2 screwdriver, remove the two 13 mm screws that secure the silver support bracket.
Passo 2 ¶
Gently lift the silver support bracket to free the heating plate from the heating coil.
Passo 3 ¶
Pinch and loosen the crimps with the needle-nose pliers.
Passo 4 ¶
Once the crimps are loosened, slide them down the tubing.
Passo 5 ¶
Separate the tubing from the heating coil by grasping the tubing in one hand and the heating coil in the other. Gently pull them apart.
Passo 6 ¶
Place your hand on the front side of the heating plate and push towards the bottom of the coffee maker to pop the heating plate out of place.