Salta al contenuto principale
Aiuto

Fluke 77 Series III Battery Replacement

Replace the battery on the Fluke 77 Series III Multimeter.

If the battery on your Fluke 77 Series III Multimeter needs to be replaced, this guide details the steps for doing so. Replacing the battery is a routine, but critical part replacement for the Fluke 77 Series III Multimeter.

Sezioni
Strumenti
Componenti Rilevanti

Passo 1 Battery  ¶ 

When doing this next step, make sure to remove the battery slowly, so you don't damage the wires connecting the battery to the device. Locate the 9V battery in the lower right corner of the device.

Passo 1 Battery  ¶ 

  • When doing this next step, make sure to remove the battery slowly, so you don't damage the wires connecting the battery to the device.

  • Locate the 9V battery in the lower right corner of the device.

  • Pull the battery out of its terminal.

Passo 2  ¶ 

Only pull on the metal snaps and battery. Pulling the cords may damage them. Detach the two metal snaps from the battery.

Passo 2  ¶ 

  • Only pull on the metal snaps and battery. Pulling the cords may damage them.

  • Detach the two metal snaps from the battery.