Salta al contenuto principale
Aiuto

Replacing Oster 6329 Bread Lift Shelf

Inconveniente Markup

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

Introduzione Migliore

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

This guide shows how to replace the toaster's bread lift shelf.

  • Autore: Jason Yoon
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Facile

It is fairly simple to replace the bread lift shelf, even though the metal flaps holding the bread lift shelf can be difficult to access.

Passo 1 Bread Lift Shelf  ¶ 

Use a flat-head screwdriver to separate the metal flap from the metal plate.

Passo 1 Bread Lift Shelf  ¶ 

  • Use a flat-head screwdriver to separate the metal flap from the metal plate.

Passo 2  ¶ 

Grasp the metal flap with the large needle nose pliers. Unbend metal flap until at a 90 degree angle from the metal plate.

Passo 2  ¶ 

  • Grasp the metal flap with the large needle nose pliers.

  • Unbend metal flap until at a 90 degree angle from the metal plate.

  • Repeat these steps for the second metal flap.

Passo 3  ¶ 

Use the large need nose pliers to grab the  metal panel.

Passo 3  ¶ 

  • Use the large need nose pliers to grab the metal panel.

  • Pull the metal panel away from the body of the toaster to dislodge the flaps.

Passo 4  ¶ 

Push the metal flaps towards the body of the toaster to access the bread lift shelf. Push the metal flaps towards the body of the toaster to access the bread lift shelf.

Passo 4  ¶ 

  • Push the metal flaps towards the body of the toaster to access the bread lift shelf.

Passo 5  ¶ 

Push down on the opposite side of the bread lift shelf to expose the metal flaps.

Passo 5  ¶ 

  • Push down on the opposite side of the bread lift shelf to expose the metal flaps.

Passo 6  ¶ 

Pull up on the bread lift shelf to remove from the toaster.

Passo 6  ¶ 

  • Pull up on the bread lift shelf to remove from the toaster.