Salta al contenuto principale
Aiuto

Canon EOS 300 Side Panel with Lever Replacement

Removing the side panel with the lever that locks the film door.

  • Autore: Jordan Tang
  • Stima il tempo: 5 minuti
  • Difficoltà: Moderato

This guide removes the side panel of the camera, allowing for repairs on the side lever.

Passo 1 Side Panel with Lever  ¶ 

Release the side latch to open the back panel. Release the side latch to open the back panel.

Passo 1 Side Panel with Lever  ¶ 

  • Release the side latch to open the back panel.

Passo 2  ¶ 

Remove the two black 4.5mm screws above and below the latch. Remove the two black 4.5mm screws above and below the latch.

Passo 2  ¶ 

  • Remove the two black 4.5mm screws above and below the latch.

Passo 3  ¶ 

Using your finger, carefully pry open the side panel from the top of camera. Pull panel downwards to remove.

Passo 3  ¶ 

  • Using your finger, carefully pry open the side panel from the top of camera.

  • Pull panel downwards to remove.

  • Make sure to keep track of the small black piece of rubber under the latch.