Salta al contenuto principale
Aiuto

HP Pavilion dv6-2158nr Hard Drive Replacement

Inconveniente Markup

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

Instructions to remove the Hard Drive from the HP Pavilion dv6-2158nr.

  • Autore: Chad
  • Stima il tempo: 5 - 10 minuti
  • Difficoltà: Facile

All your files are stored on the hard drive. People usually replace them when they need more storage. Before delving into this guide, make sure your computer is unplugged and completely turned off.

Sezioni
Strumenti

Passo 1 Hard Drive  ¶ 

Use a Phillips #1 screwdriver to loosen the two 6mm captive screws that secure the hard drive port bezel cover to the computer. Lift the right side of the hard drive port bezel cover, swing it up and to the left, and remove the cover. Lift the right side of the hard drive port bezel cover, swing it up and to the left, and remove the cover.

Passo 1 Hard Drive  ¶ 

  • Use a Phillips #1 screwdriver to loosen the two 6mm captive screws that secure the hard drive port bezel cover to the computer.

  • Lift the right side of the hard drive port bezel cover, swing it up and to the left, and remove the cover.

Passo 2  ¶ 

Use the Mylar tab to lift the hard drive up, and then slide out to release it from the hard drive bay. Use the Mylar tab to lift the hard drive up, and then slide out to release it from the hard drive bay.

Passo 2  ¶ 

  • Use the Mylar tab to lift the hard drive up, and then slide out to release it from the hard drive bay.

Passo 3  ¶ 

Disconnect the hard drive cable from the system board. Remove four 4mm screws from the hard drive case. There are two screws on each side of the hard drive.

Passo 3  ¶ 

  • Disconnect the hard drive cable from the system board.

  • Remove four 4mm screws from the hard drive case.

  • There are two screws on each side of the hard drive.