Salta al contenuto principale
Aiuto

Nikon D70 Front Cover Replacement

Solo Prerequisita

Solo Prerequisita

Per favore tieni conto che questa guida è solo un prerequisito per altre guide.

This is an internal prerequisite that should remain unpublished.

Passo 1 Front Cover  ¶ 

Use a plastic opening tool to carefully pry up the flash unit at the point shown in the picture.

Passo 1 Front Cover  ¶ 

  • Use a plastic opening tool to carefully pry up the flash unit at the point shown in the picture.

Passo 2  ¶ 

Remove the two 4.3 mm Phillips screws securing the top edge of the front cover to the top cover.

Passo 2  ¶ 

  • Remove the two 4.3 mm Phillips screws securing the top edge of the front cover to the top cover.

Passo 3  ¶ 

Remove the two 4.3 mm Phillips screws on the face of the front cover.

Passo 3  ¶ 

  • Remove the two 4.3 mm Phillips screws on the face of the front cover.

Passo 4  ¶ 

Use the sharp end of a metal spudger or a razor blade to peel the sticker out of the center of the automatic/manual focus switch.

Passo 4  ¶ 

  • Use the sharp end of a metal spudger or a razor blade to peel the sticker out of the center of the automatic/manual focus switch.

Passo 5  ¶ 

Remove the 6.3 mm shouldered Phillips screw from the center of the automatic/manual focus switch. Pull the automatic/manual focus switch away from the front cover.

Passo 5  ¶ 

  • Remove the 6.3 mm shouldered Phillips screw from the center of the automatic/manual focus switch.

  • Pull the automatic/manual focus switch away from the front cover.

Passo 6  ¶ 

If present, remove the plastic cover from the lens mount.

Passo 6  ¶ 

  • If present, remove the plastic cover from the lens mount.

Passo 7  ¶ 

Pull the front cover away from the D70.

Passo 7  ¶ 

  • Pull the front cover away from the D70.