Salta al contenuto principale
Aiuto

Tecnica: PlayStation 3 Slim - Manually Removing Stuck Disk

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

PlayStation 3 Slim - Manually Removing Stuck Disk

  • Autore: ZFix
  • Stima il tempo: 20 - 45 minuti
  • Difficoltà: Moderato

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

Passo 1 PlayStation 3 Slim - Manually Removing Stuck Disk  ¶ 

Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

Passo 1 PlayStation 3 Slim - Manually Removing Stuck Disk  ¶ 

  • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

Passo 2  ¶ 

Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

Passo 2  ¶ 

  • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

Passo 3  ¶ 

First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

Passo 3  ¶ 

  • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

Passo 4  ¶ 

In this case we have ... 4x disks. :) .

Passo 4  ¶ 

  • In this case we have ... 4x disks. :)

  • .

  • Did you do it successfully?

Passo 5  ¶ 

Test the console before assembling. And don't forget to put the spindle disc magnet. Test the console before assembling. And don't forget to put the spindle disc magnet.

Passo 5  ¶ 

  • Test the console before assembling. And don't forget to put the spindle disc magnet.