Salta al contenuto principale
Aiuto

Fairphone 1 Display Assembly Replacement

Replace the Display Assembly in your Fairphone.

Use this guide to replace the display assembly, including the LCD screen, front glass and digitizer, on your Fairphone.

Passo 1 Display Assembly  ¶ 

Remove the antenna interconnect cable from the display assembly. The three sections of the cable with exposed metal fit into the grounding clips on the side of the display assembly. The three sections of the cable with exposed metal fit into the grounding clips on the side of the display assembly.

Passo 1 Display Assembly  ¶ 

  • Remove the antenna interconnect cable from the display assembly.

  • The three sections of the cable with exposed metal fit into the grounding clips on the side of the display assembly.

Passo 2  ¶ 

Remove the rubber guide from the recess near the front facing camera hole. Be sure not to lose this rubber stopper, transfer it to the new display.

Passo 2  ¶ 

  • Remove the rubber guide from the recess near the front facing camera hole.

  • Be sure not to lose this rubber stopper, transfer it to the new display.

Passo 3  ¶ 

Remove the rubber guide to the right of the earpiece speaker recess. Be sure not to lose this rubber stopper, transfer it to the new display. Your replacement display will have a piece of yellow tape covering the touch sensor chip. Do not remove this tape; if you do, your phone may not work after reassembly.

Passo 3  ¶ 

  • Remove the rubber guide to the right of the earpiece speaker recess.

  • Be sure not to lose this rubber stopper, transfer it to the new display.

  • Your replacement display will have a piece of yellow tape covering the touch sensor chip. Do not remove this tape; if you do, your phone may not work after reassembly.