Salta al contenuto principale
Aiuto

Samsung Galaxy Note II USB Board Replacement

Replace the USB board in your Samsung Galaxy Note II.

  • Autore: Sam Goldheart
  • Stima il tempo: 25 minuti - 1 ora
  • Difficoltà: Moderato

Use this guide to replace the USB board in a Samsung Galaxy Note II.

Passo 1 USB Board  ¶ 

Using the flat end of a spudger, disconnect the USB board cable connector. Use the tip of a spudger to disconnect the antenna cable connector from the USB board.

Passo 1 USB Board  ¶ 

  • Using the flat end of a spudger, disconnect the USB board cable connector.

  • Use the tip of a spudger to disconnect the antenna cable connector from the USB board.

Passo 2  ¶ 

Push the flat end of a spudger under the USB board to separate it from the display assembly. Insert the spudger at a shallow angle to avoid bending or damaging the USB board.

Passo 2  ¶ 

  • Push the flat end of a spudger under the USB board to separate it from the display assembly.

  • Insert the spudger at a shallow angle to avoid bending or damaging the USB board.

Passo 3  ¶ 

Remove the USB board from the display assembly.

Passo 3  ¶ 

  • Remove the USB board from the display assembly.