Salta al contenuto principale
Aiuto

Bush Pump Foot Valve Replacement

Replace the foot valve in a Bush pump.

This guide will walk you through the procedure to remove the cylinder from the bottom of the pump, then open it up and replace the foot valve, or check it for wear and tear.

Passo 1 Foot Valve  ¶ 

Using two pipe wrenches, remove the end cap from the cylinder. Using two pipe wrenches, remove the end cap from the cylinder. Using two pipe wrenches, remove the end cap from the cylinder.

Passo 1 Foot Valve  ¶ 

  • Using two pipe wrenches, remove the end cap from the cylinder.

Passo 2  ¶ 

Remove the foot valve from the end cap. Take note of the direction of the foot valve in the end cap. This is extremely important for reassembly, as the pump will not work if the valve is facing the wrong direction.

Passo 2  ¶ 

  • Remove the foot valve from the end cap.

  • Take note of the direction of the foot valve in the end cap. This is extremely important for reassembly, as the pump will not work if the valve is facing the wrong direction.

Passo 3  ¶ 

Check the foot valve components for signs of wear. Check the foot valve components for signs of wear.

Passo 3  ¶ 

  • Check the foot valve components for signs of wear.