Salta al contenuto principale
Aiuto

Asus Eee PC 1008ha Cooling Fan Replacement

Pallini!

Pallini!

Un migliore coordinamento tra i markup e il colore/tipo dei pallini aiuterà a rendere più chiara questa guida!

Testo Confuso

Testo Confuso

Parte del testo di questa guida è confusionario, doppio, o fuori tema. Modificarlo per renderlo più chiaro!

Attrezzi Non Corretti

Attrezzi Non Corretti

Contribuisci a rendere migliore questa guida usando i giusti strumenti nelle immagini e/o nel testo.

Replacement guide for the cooling fan of the netbook.

  • Autore: Michael Dooley
  • Stima il tempo: 15 minuti
  • Difficoltà: Facile

This task will normally be performed if the fan is faulty, broken, or if the user is trying to disassemble the entire device. You will start with removing the keyboard and continue to carefully remove parts within the laptop to finally disconnect fan for replacement.

Passo 1 Cooling Fan  ¶ 

Remove the 2mm screws on the copper heat sink on the left side of the device. Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink. Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink.

Passo 1 Cooling Fan  ¶ 

  • Remove the 2mm screws on the copper heat sink on the left side of the device.

  • Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink.

Passo 2  ¶ 

Remove the small white connector attached to the fan (make sure to pull from the white connector and not with the wires as this can cause damage to the component) Replace with new fan!

Passo 2  ¶ 

  • Remove the small white connector attached to the fan (make sure to pull from the white connector and not with the wires as this can cause damage to the component)

  • Replace with new fan!