Salta al contenuto principale
Aiuto

Apple TV 1st Generation Fan Replacement

Replace the fan in your Apple TV 1st Generation.

  • Autore: ropel
  • Difficoltà: Moderato

Replace the fan in your Apple TV 1st Generation.

Sezioni
Strumenti

Passo 1 Fan  ¶ 

The fan is held in place by three rubber posts.

Passo 1 Fan  ¶ 

  • The fan is held in place by three rubber posts.

  • Using a pair of tweezers, squeeze the top of each post and push the post down into the hole. Repeat for all three posts.

  • During reinstallation, it helps to lubricate the rubber posts. Try weaving a string through the holes in the posts to pull them up through the mounting points.

  • Do not excessively pull on the posts, as they may rip.

Passo 2  ¶ 

Using a pair of tweezers, pull the fan connector straight up from its socket on the logic board.

Passo 2  ¶ 

  • Using a pair of tweezers, pull the fan connector straight up from its socket on the logic board.

  • Lift and remove the fan out of the upper case.