Salta al contenuto principale
Aiuto

LG VX5300 Keypad Replacement

  • Autore: Ashley
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Facile

This guide illustrates how to replace the LG VX5300 keypad.

Passo 1 Keypad  ¶ 

Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars. Look to the following photo for the location of the two sensor bars.

Passo 1 Keypad  ¶ 

  • Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars.

  • Look to the following photo for the location of the two sensor bars.

  • Without disconnecting the orange wire, carefully flip the computer chip over and lay flat on the table, exposing the keypad.

Passo 2  ¶ 

Carefully remove the keypad and replace with the new keypad. If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.

Passo 2  ¶ 

  • Carefully remove the keypad and replace with the new keypad.

  • If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.

Passo 3  ¶ 

Carefully set the computer chip back in place.

Passo 3  ¶ 

  • Carefully set the computer chip back in place.

Passo 4  ¶ 

Place the back cover back on and secure it with the screws. Place the back cover back on and secure it with the screws.

Passo 4  ¶ 

  • Place the back cover back on and secure it with the screws.

Passo 5  ¶ 

Insert the battery. Slide the back cover on the phone.

Passo 5  ¶ 

  • Insert the battery.

  • Slide the back cover on the phone.