Salta al contenuto principale
Aiuto

Lexmark Intuition S505 Scanner Unit Replacement

Vigilanza sulla Grammatica

Vigilanza sulla Grammatica

Adotta il tuo insegnante di inglese interno e contribuisci a migliorare la grammatica di questa guida!

Testo Confuso

Testo Confuso

Parte del testo di questa guida è confusionario, doppio, o fuori tema. Modificarlo per renderlo più chiaro!

Attrezzi Non Corretti

Attrezzi Non Corretti

Contribuisci a rendere migliore questa guida usando i giusti strumenti nelle immagini e/o nel testo.

Inconveniente Markup

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

This guide will inform readers how to install the scanner unit of the printer.

  • Autore: Raymond
  • Stima il tempo: 20 - 30 minuti
  • Difficoltà: Moderato

The scanner unit allows users to scan copies.

Passo 1 Scanner Unit  ¶ 

Locate the two screw holes that connect the two cylindrical extensions from the top portion of the scanner unit to the printer.

Passo 1 Scanner Unit  ¶ 

  • Locate the two screw holes that connect the two cylindrical extensions from the top portion of the scanner unit to the printer.

Passo 2  ¶ 

Unscrew the two size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.

Passo 2  ¶ 

  • Unscrew the two size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.

Passo 3  ¶ 

Raise and close the scanner unit to observe that the hinges lock in place when lifted.

Passo 3  ¶ 

  • Raise and close the scanner unit to observe that the hinges lock in place when lifted.

Passo 4  ¶ 

Firmly press the hinges inward toward the middle of the printer on both sides at the same time. The hinges should be easily lifted up and removed. Firmly press the hinges inward toward the middle of the printer on both sides at the same time. The hinges should be easily lifted up and removed.

Passo 4  ¶ 

  • Firmly press the hinges inward toward the middle of the printer on both sides at the same time. The hinges should be easily lifted up and removed.

Passo 5  ¶ 

Locate the three screws connecting the plastic tray to the printer.

Passo 5  ¶ 

  • Locate the three screws connecting the plastic tray to the printer.

Passo 6  ¶ 

Remove the three size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.

Passo 6  ¶ 

  • Remove the three size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.

Passo 7  ¶ 

Remove the plastic cover by unlocking the plastic hinges at the inside edges of the printer. Use a plastic opening tool or a tweezer to slowly move in between the crease around the printer to unlock it.

Passo 7  ¶ 

  • Remove the plastic cover by unlocking the plastic hinges at the inside edges of the printer. Use a plastic opening tool or a tweezer to slowly move in between the crease around the printer to unlock it.

Passo 8  ¶ 

Slowly raise, but do not remove the plastic cover with the scanner unit so that it exposes the three cables connecting the scanner unit to the printer. Slowly raise, but do not remove the plastic cover with the scanner unit so that it exposes the three cables connecting the scanner unit to the printer.

Passo 8  ¶ 

  • Slowly raise, but do not remove the plastic cover with the scanner unit so that it exposes the three cables connecting the scanner unit to the printer.

Passo 9  ¶ 

Carefully unplug the pink cable.

Passo 9  ¶ 

  • Carefully unplug the pink cable.

Passo 10  ¶ 

Carefully unplug the gray data cable.

Passo 10  ¶ 

  • Carefully unplug the gray data cable.

Passo 11  ¶ 

Carefully unplug the white ribbon data cable.

Passo 11  ¶ 

  • Carefully unplug the white ribbon data cable.

Passo 12  ¶ 

Locate the three ports for the cables from the scanner unit and make sure they are unplugged.

Passo 12  ¶ 

  • Locate the three ports for the cables from the scanner unit and make sure they are unplugged.

Passo 13  ¶ 

Remove the scanner unit with the plastic cover by lifting it up from the bottom portion of the printer.

Passo 13  ¶ 

  • Remove the scanner unit with the plastic cover by lifting it up from the bottom portion of the printer.

  • Be careful with the paper tray and make sure it is evenly lifted through the rectangular hole in the plastic tray