Salta al contenuto principale
Aiuto

Asus Eee PC 1215N Keyboard Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Keyboard removal / installation.

  • Autore: Gaetan
  • Stima il tempo: 8 minuti
  • Difficoltà: Moderato

Passo 1 Keyboard  ¶ 

Make sure that the two upper screws inside the RAM compartment are removed before to continue. (Refer to Step 5). Remove the keyboard 4 screws on the bottom. Use a Plastic Opening Tools to release the keyboard clips on the left and right side.

Passo 1 Keyboard  ¶ 

  • Make sure that the two upper screws inside the RAM compartment are removed before to continue. (Refer to Step 5).

  • Remove the keyboard 4 screws on the bottom.

  • Use a Plastic Opening Tools to release the keyboard clips on the left and right side.

Passo 2  ¶ 

At this step, the keyboard is still maintained with double-sided tape between the keyboard underside and the metallic PCB protector.

Passo 2  ¶ 

  • At this step, the keyboard is still maintained with double-sided tape between the keyboard underside and the metallic PCB protector.

  • Carefully slide a Spudger between the keyboard underside and the metallic PCB protector near the center/right at the bottom. Use the spudger as a lever to release the keyboard from the metallic PCB protector.

  • The keyboard is still connected to the PCB with a ribbon. Handle it carefully.

Passo 3  ¶ 

Carefully slide the keyboard to the top in order to see the ribbon connector on the PCB. Use a Spudger to slide the connector attachment black part and release the ribbon from the PCB.

Passo 3  ¶ 

  • Carefully slide the keyboard to the top in order to see the ribbon connector on the PCB.

  • Use a Spudger to slide the connector attachment black part and release the ribbon from the PCB.

  • Now you can remove the keyboard.