Salta al contenuto principale
Aiuto

Nokia 6102i Inside Display Screen Replacement

Necessarie Immagini Migliori

Necessarie Immagini Migliori

Delle foto più belle renderanno migliore questa guida. Contribuisci scattando, modificando o caricando immagini nuove!

This guide is to help assist you in replacing the inside display screen of the Nokia 6102i. This is a well described 6 step process of how to complete.

  • Autore: Danielle
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Moderato

This guide is to help assist you in replacing the inside display screen of the Nokia 6102i. This is a well described 6 step process of how to complete the replacement.

Passo 1 Inside Display Screen  ¶ 

This step does not require much force. With the screen facing up, connect the display connector to the smaller of the open connectors on the motherboard.

Passo 1 Inside Display Screen  ¶ 

  • This step does not require much force.

  • With the screen facing up, connect the display connector to the smaller of the open connectors on the motherboard.

Passo 2  ¶ 

Place the metal case over the top of the screen so that it snaps into place. Place the metal case over the top of the screen so that it snaps into place.

Passo 2  ¶ 

  • Place the metal case over the top of the screen so that it snaps into place.

Passo 3  ¶ 

Insert the circuitboard into the back of the phone, with the inside screen facing down. Lightly press down on the left hand corner so the circuitboard attaches to the phone. Lightly press down on the left hand corner so the circuitboard attaches to the phone.

Passo 3  ¶ 

  • Insert the circuitboard into the back of the phone, with the inside screen facing down.

  • Lightly press down on the left hand corner so the circuitboard attaches to the phone.

Passo 4 Cover  ¶ 

Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case.

Passo 4 Cover  ¶ 

  • Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case.

Passo 5  ¶ 

Open the phone and insert the screws tightly. Open the phone and insert the screws tightly.

Passo 5  ¶ 

  • Open the phone and insert the screws tightly.

Passo 6  ¶ 

This step does not require much force. Snap on the black piece over the exposed screws.

Passo 6  ¶ 

  • This step does not require much force.

  • Snap on the black piece over the exposed screws.