Salta al contenuto principale
Aiuto

Dell Inspiron 17 5765 Hard-Drive Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: darrius
  • Difficoltà: Moderato

How to remove and replace the hard-drive

Passo 1 Disconnecting the cable  ¶ 

Nessuna immagine

Passo 1 Disconnecting the cable  ¶ 

  • Lift the latch and disconnect the hard-drive cable from the system board.

Passo 2 Removing the screws  ¶ 

Nessuna immagine

Passo 2 Removing the screws  ¶ 

  • Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

Passo 3 Lifting the hard-drive assembly  ¶ 

Nessuna immagine

Passo 3 Lifting the hard-drive assembly  ¶ 

  • Lift the hard-drive assembly from the palm rest and keyboard assembly.

Passo 4 Removing screws  ¶ 

Nessuna immagine

Passo 4 Removing screws  ¶ 

  • Remove the screws that secure the hard-drive bracket to the hard drive.

Passo 5 Lifting the hard-drive  ¶ 

Nessuna immagine

Passo 5 Lifting the hard-drive  ¶ 

  • Lift the hard drive from the hard-drive bracket.

Passo 6 Disconnecting the interposer  ¶ 

Nessuna immagine

Passo 6 Disconnecting the interposer  ¶ 

  • Disconnect the interposer from the hard drive.

Passo 7 Connecting the interposer  ¶ 

Nessuna immagine

Passo 7 Connecting the interposer  ¶ 

  • Connect the interposer to the hard drive.

Passo 8 Aligning the screws  ¶ 

Nessuna immagine

Passo 8 Aligning the screws  ¶ 

  • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

Passo 9 Secure the screws  ¶ 

Nessuna immagine

Passo 9 Secure the screws  ¶ 

  • Replace the screws that secure the hard-drive bracket to the hard drive.

Passo 10 Placing the hard-drive assembly  ¶ 

Nessuna immagine

Passo 10 Placing the hard-drive assembly  ¶ 

  • Place the hard-drive assembly on the palm rest and keyboard assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly

Passo 11 Secure the screws  ¶ 

Nessuna immagine

Passo 11 Secure the screws  ¶ 

  • Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

Passo 12 Sliding the cable to connector  ¶ 

Nessuna immagine

Passo 12 Sliding the cable to connector  ¶ 

  • Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.