Salta al contenuto principale
Aiuto

Hair Dryer Button Switchboard Replacement

Pallini!

Pallini!

Un migliore coordinamento tra i markup e il colore/tipo dei pallini aiuterà a rendere più chiara questa guida!

Fallo a Fettine

Fallo a Fettine

I passaggi in questa guida dovrebbero essere suddivisi e trasformati in una serie di guide prerequisite.

Introduzione Migliore

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

This guide explains how to identify, remove, and install the button switchboard in a generic hair dryer.

  • Autore: Mitch
  • Difficoltà: Moderato

Passo 1 Button Switchboard  ¶ 

Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.

Passo 1 Button Switchboard  ¶ 

  • Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.

Passo 2  ¶ 

Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.

Passo 2  ¶ 

  • Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.

Passo 3  ¶ 

The hair dryer is now  disassembled. The fan, motor, heating element cover, and internal wiring are exposed.

Passo 3  ¶ 

  • The hair dryer is now disassembled. The fan, motor, heating element cover, and internal wiring are exposed.

  • Identify the turbo button.

  • Identify the button switchboard.

Passo 4  ¶ 

Gently pull the turbo button away from the hair dryer body.

Passo 4  ¶ 

  • Gently pull the turbo button away from the hair dryer body.

  • If the turbo setting is still not working after you replace the switchboard, consider using soldering techniques to replace the turbo button .

Passo 5  ¶ 

Gently pull the button switchboard away from the hair dryer body.

Passo 5  ¶ 

  • Gently pull the button switchboard away from the hair dryer body.

  • Using a desoldering wick and a soldering iron, desolder the wires.

  • Refer to the following page for desoldering instructions: Soldering Skills