Salta al contenuto principale
Aiuto

Ematic FunTab 3 Back Panel Replacement

Open or replace the case on your Ematic FunTab 3.

  • Autore: Harrison Lee
  • Stima il tempo: 2 minuti
  • Difficoltà: Molto facile

If you need to open your device or replace the back panel, this guide will show you how.

Passo 1 Back Panel  ¶ 

Turn off the device before starting To prevent damage, open the device on the side without the buttons. Insert the hooked end of the plastic opening tool in the gap between the screen and the back panel on the edge of the device.

Passo 1 Back Panel  ¶ 

  • Turn off the device before starting

  • To prevent damage, open the device on the side without the buttons.

  • Insert the hooked end of the plastic opening tool in the gap between the screen and the back panel on the edge of the device.

  • Slide the plastic opening tool down the long side of the device.

  • Insert tool again and slide it down the long slide of the case a second time.

Passo 2  ¶ 

Pull the back panel away from the screen.

Passo 2  ¶ 

  • Pull the back panel away from the screen.