Salta al contenuto principale
Aiuto

HP Stream TPN-Q155 Keyboard replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Jim Yang
  • Stima il tempo: 30 minuti - 3 ore
  • Difficoltà: Moderato
Strumenti
Componenti Rilevanti

Passo 1 HP Stream TPN-Q155 Keyboard replacement  ¶ 

Unscrew all the screws on the back of the laptop and remove the cover

Passo 1 HP Stream TPN-Q155 Keyboard replacement  ¶ 

  • Unscrew all the screws on the back of the laptop and remove the cover

Passo 2  ¶ 

Remove the black adhesive to expose plastic rivets. Remove the black adhesive to expose plastic rivets.

Passo 2  ¶ 

  • Remove the black adhesive to expose plastic rivets.

Passo 3  ¶ 

Now, get a tissue and prepare for the sweat. And melt any rivet from green marker to orange marker like. Try not to cut it off, or you might be in trouble to hold the metal cover And melt any rivet from green marker to orange marker like. Try not to cut it off, or you might be in trouble to hold the metal cover

Passo 3  ¶ 

  • Now, get a tissue and prepare for the sweat.

  • And melt any rivet from green marker to orange marker like. Try not to cut it off, or you might be in trouble to hold the metal cover

Passo 4  ¶ 

Same process and keep melting the rest of the plastic rivets after the metal cover. This can easily going over 2 or 3 hours if you are not quick enough. And if everything goes alright, you might eventually get the problem keyboard removed and put a new keyboard back in.

Passo 4  ¶ 

  • Same process and keep melting the rest of the plastic rivets after the metal cover. This can easily going over 2 or 3 hours if you are not quick enough.

  • And if everything goes alright, you might eventually get the problem keyboard removed and put a new keyboard back in.

  • then, use your solder station the melt the plastic back to the keyboard.