Salta al contenuto principale
Aiuto

Tecnica: How to Wire a RJ-45 KeyStone Jack

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

A guide to help wire a keystone jack for use in patch panels and wall plate applications for ethernet

  • Autore: Samuel Lynch
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Facile

This is a simple guide to wiring a keystone jack for use in house and business applications.

Strumenti

Passo 1 How to Wire a RJ-45 KeyStone Jack  ¶ 

Acquire a Keystone Jack Acquire a Keystone Jack Acquire a Keystone Jack

Passo 1 How to Wire a RJ-45 KeyStone Jack  ¶ 

Passo 2  ¶ 

Use your wire stripper to cut the outer sheath Do Not Rotate more than 3-4 times as it will cut the wires underneath. when the length of exposed wires are at a decent length (a little less than a thumbs length) separate the wires by color.

Passo 2  ¶ 

  • Use your wire stripper to cut the outer sheath

  • Do Not Rotate more than 3-4 times as it will cut the wires underneath.

  • when the length of exposed wires are at a decent length (a little less than a thumbs length) separate the wires by color.

Passo 3  ¶ 

on the keystone jack you will see colors. line the wires up to the corresponding colors (white blue - blue, white orange - orange, etc.) use the punchdown tool with the longer side of the blade on the outside to punch the wires in and it will cut off the excess. repeat for each color

Passo 3  ¶ 

  • on the keystone jack you will see colors. line the wires up to the corresponding colors (white blue - blue, white orange - orange, etc.)

  • use the punchdown tool with the longer side of the blade on the outside to punch the wires in and it will cut off the excess.

  • repeat for each color

Passo 4  ¶ 

open up your mounting box there should be a frame for your jack to snap into there should be a frame for your jack to snap into

Passo 4  ¶ 

  • open up your mounting box

  • there should be a frame for your jack to snap into

Passo 5  ¶ 

place the jack into the mounting box, there should be places for zip ties to hold the cable in place place the cover on top and you are done with your cable!

Passo 5  ¶ 

  • place the jack into the mounting box, there should be places for zip ties to hold the cable in place

  • place the cover on top and you are done with your cable!

  • test the line using a cable tester.